Calibrated Weights

Calibrated Weights are used almost exclusively for adjusting and testing – (calibration of electronic balances). We therefore call them Test weights as this is their purpose of use. Adjusting a balance means that you are intervening in the weighing system, to make sure that the display is set to show the correct nominal value. And Calibration, on the other hand you are testing whether the display is correct and documenting any deviation. Regular servicing is essential for ensuring that a balance or a weighting device performs with specification. Thus adjusting and calibration both requires test weights, which are also used with weighing instruments of all classes. These test weights are also need to be protected and finely coated thus to properly adjust and calibrate our weighing machines, weighing instruments and other weighing systems.

The International valid OIML Directive R111-2004 classifies test weights hierarchically into accuracy classes with E1 is the most accurate and M3 is the least accurate weight class. As the appropriate test weight is only classified as checking equipment if it has relevant proof of accuracy. The whole test weight range in OIML accuracy classes are E1,E2,F1,F2,M1,M2,M3. With E1 being the most accurate and M3 being the least accurate one.

Leave a Reply

Your email address will not be published. Required fields are marked *